Articles and Advice

Winterproofing Windows and Doors: A Guide to Keeping the Cold Out

As winter approaches, your home's windows and doors play a crucial role in keeping you warm and comfortable while maintaining energy efficiency. Drafts, air leaks, and worn seals can cause your heating system to work harder than necessary, resulting in higher utility bills and chilly indoor spaces. The good news? With a few key maintenance steps, you can winterproof your windows and doors to block out the cold and keep warmth where it belongs — inside your home.

Here's your guide for winterproofing windows and doors as the cold starts to set in:

1. Inspect for Drafts and Leaks

Start by walking through your home and feeling around the window and door frames for cold air seeping in. You can also use the "candle test": hold a lit candle near the edges of a closed window or door. If the flame flickers, there's a draft. Once you identify problem areas, mark them for sealing. Small cracks can often be easily fixed, while larger gaps may require professional attention.

2. Seal Drafts With Caulk or Weatherstripping

Caulking and weatherstripping are two of the most effective — and affordable — ways to stop drafts. Use silicone-based caulk to seal any visible cracks around exterior window frames. For movable parts, such as doors and operable windows, apply adhesive-backed weatherstripping or rubber gaskets to seal gaps when they're shut. Remember to inspect the condition of existing materials annually, as they can dry out and lose effectiveness over time.

3. Add or Replace Door Sweeps

Even a small gap beneath your doors can let in a surprising amount of cold air. Installing or replacing door sweeps provides an instant fix. For exterior doors, opt for a heavy-duty sweep with a flexible rubber seal that hugs uneven surfaces. For interior doors leading to unheated areas, such as garages or basements, a simple brush-style draft stopper can make a significant difference.

4. Upgrade Window Coverings

Heavy curtains or insulated drapes can add an extra layer of warmth to your home. During the day, open them to let sunlight naturally heat your rooms. At night, close them tightly to trap the warmth inside. If you prefer a sleeker look, consider cellular shades — also known as honeycomb blinds — which provide excellent insulation while still allowing light control.

5. Consider Temporary Window Insulation

If replacing windows isn't in your budget, clear plastic window insulation kits are a cost-effective alternative. When properly applied, the film creates a nearly invisible barrier that can reduce heat loss by up to 50%. These kits are especially useful for older homes with single-pane windows.

6. Check and Replace Doors and Windows

Loose hinges, warped frames, or latches that don't close tightly can all allow cold air to enter. Tighten hardware, lubricate hinges, and make sure doors and windows close snugly. If necessary, replace worn-out locks or handles to ensure a secure, airtight fit.

7. Plan for Long-Term Improvements

If your windows or doors are older and constantly leaking, upgrading to energy-efficient models is a smart investment. Look for products with ENERGY STAR® certification, which are designed to reduce heat transfer and lower energy costs throughout the year.

By taking time to winterproof your windows and doors now, you'll create a warmer, more energy-efficient home that's ready to face even the coldest months ahead — without the chill sneaking in.

Thinking about buying
or selling a home? I can help make the process easy, click here to get in touch today!

Winterproofing Windows and Doors: A Guide to Keeping the Cold Out

Login to Saved Search

We have detected that you have cookies disabled.